Milwaukee 49-93-5260 4-Inch 16/24-Grit Armor Cup

Buy Cheap Milwaukee 49-93-5260 4-Inch 16/24-Grit Armor Cup

Buy Low Price From Here Now
Silicon Carbide Flared Armor Cup Shaped Grinding Wheels has dual grit- fine grit outer rim wears slowly and eliminates waste by maintaining a flat grinding surface while the coarser grit grinds the stone, masonry or concrete. The grit is resinoid bonded. Each Cup wheel is fitted with a 5/8-11 thread molded integrally inside the cup for ready mounting on your grinder. Requires special guard. Order 49-12-0062 Guard for use with a 4 inch Cup Wheel. One Cup Wheel per box.FEATURES: 4 inch. 16/24 Grit Silicon Carbide Armor. 5/8-11 thread. Type 11 Flared Cup
Readmore

Technical Details

- 4 inch
- 16/24 Grit Silicon Carbide Armor
- 5/8-11 thread
- Type 11 Flared Cup
- Limited Warranty
See more technical details

Images Product

Buy Milwaukee 49-93-5260 4-Inch 16/24-Grit Armor Cup Now

Milwaukee 48-52-5060 3-Inch Crimped Wire Cup Brush

Buy Cheap Milwaukee 48-52-5060 3-Inch Crimped Wire Cup Brush

Buy Low Price From Here Now
For lighter duty surface cleaning a Crimped style Cup Brush is appropriate. Crimped wire is less rigid than knotted and can get into crevices more easily. Milwaukee offers a full range of Crimp and Knotted Wire Cup Brushes. This Crimp Wire Cup Brush is designed to be used on 4-1/2 or 5 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made from carbon steel wire.FEATURES: 3 inch. 5/8-11 thread. .012 ga wire. Carbon steel
Readmore

Technical Details

- 3 inch
- 5/8-11 thread
- .012 ga wire
- Carbon steel
See more technical details

 "cup brush" 2009-06-05
By Jay S. Granly (spokane wa usa)
this tool works perfectly on rusty bulldozer parts.it seems tough enough to handle whatever i throw at it and almost no wire bits flying off at me. very handy on heavy steel.


Images Product

Buy Milwaukee 48-52-5060 3-Inch Crimped Wire Cup Brush Now

Milwaukee 48-52-5040 2-3/4-Inch Knot Cup Brush

Buy Cheap Milwaukee 48-52-5040 2-3/4-Inch Knot Cup Brush

Buy Low Price From Here Now
Milwaukee offers the finest quality Knot Wire Cup Brushes to give you long service on the toughest cleaning jobs. These cup brushes are ideally suited for cleaning castings, structural steel and sheet metal. Milwaukee offers a full range of Knotted and Crimped Cup Brushes as well as a full line of Stringer Bead and Full Cable Twist Wire Wheels. This Knot Wire Cup Brush is designed to be used on 4-1/2 inch or 5 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made of carbon steel.FEATURES: 2-3/4 inch. 5/8-11 thread. .020 ga wire. Carbon steel
Readmore

Technical Details

- 2-3/4 inch
- 5/8-11 thread
- .020 ga wire
- Carbon steel
See more technical details

 "Does the job on rusty uneven metal" 2010-04-16
By CB (Sioux Falls)
I purchased one of these to refurbish a large rusty mower deck. It worked great for removing the flaked paint and rust on the upper surface as well as for removing the hardened grass and rust on the lower. I spent about three hours grinding various parts and probably used about half the life of the bristles. I'll be getting a few replacements to keep around the shop for future use.

 "heavy duty cup brush" 2009-06-05
By Jay S. Granly (spokane wa usa)
this cup brush is tough enough to clean the dirtiest machine parts especially in hard to reach areas. it is definatly made for heavy iron and steel. a bit too stiff for light gauge material.

 "The best tool for cleaning up metal" 2008-10-17
By Dean Bielanowski (Brisbane, Queensland Australia)
I use these cup brushes often. They are by far the best tool for cleaning up old metal objects with flaking paint or removing surface rust. You do need to take care with them as they can grab in corners or when working around metal balustrades and rails etc but they will quickly and readily remove old paint ready for new coats. Many other uses as well around the home.


Images Product

Buy Milwaukee 48-52-5040 2-3/4-Inch Knot Cup Brush Now